Air Cleaner Assembly

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the battery negative terminal.
Remove the engine cover.
(Refer to Engine and Transmission Assembly - "ENGINE COVER ")
Remove the air duct (A).

Courtesy of HYUNDAI MOTOR AMERICA

Remove the air cleaner assembly.

Disconnect the breather hose (A).
Disconnect the RCV hose & pipe (B).

Air cleaner intake hose (C) and then air cleaner assembly (D).

Tightening Torque

Hose clamp bolt:

2.9 - 4.9 N.m (0.3 - 0.5 kgf.m, 2.1 - 3.6 lb-ft)

Air cleaner assembly bolts:

3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 Ib-ft)

Courtesy of HYUNDAI MOTOR AMERICA

Install in the reverse order of removal.