LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Ignition System - 1.6L) >> Spark Plug >> Repair Procedures >> Inspection >> [On-Vehicle Inspection]

[On-Vehicle Inspection]

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Accelerate the engine to about 3, 000 RPM 3 times or more.
  2. Remove the spark plug.
  3. Check the spark plug visually.

    If the electrode is dry, the spark plug is normal.

    If the electrode is wet, check the damage and electrode gap below.

scientia non olet · About LEMON Manuals