LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Abs/ESC Diagnosis (1 Of 2)) >> DTC C1604-96: ECU Hardware Error >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
Item Detecting Condition Possible Cause
DTC Strategy
  • Internal monitoring
  • Poor connector connection
  • Faulty HECU
Enable Condition
  • Normal battery voltage (9 to 16V)
Threshold Value
  • After completion of EPB motor operation, when EPB motor drive "Power-FET" is turned on/off and the monitored voltage exceeds the reference value for more than 1.5s
    • Reference value: Below 0.7V (when OFF), greater than battery voltage *60% (when ON)
  • After completion of EPB motor operation, when EPB motor drive pre-driver is turned on/off and the monitored voltage exceeds the reference value for more than 1.5s
    • Reference value: Below 0.38V (when OFF), between 0.28V and 0.63V (when ON)
Warning Lamp
  • AVH, EPB
Disable Condition
  • When the ignition switch turns off and then on
scientia non olet · About LEMON Manuals