DTC Information: DTC Detecting Condition
WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
|
- Poor connector connection
- Faulty WSS
- Faulty HECU
- Faulty logic
|
| Enable Condition |
- Normal battery voltage (9 to 16V)
|
| Threshold Value |
Case1 |
- If the speed difference of the wheel exceeds the threshold during driving but the faulty wheel can not be identified
- FL/RL, FR/RR: 6 to 12 KPH (3.7 to 7.4 MPH)
FL/FR: 10 to 16 KPH (6.2 to 12.4 MPH), fault detection time is 20s
- FL/RL, FR/RR: Higher than 12 KPH (7.4 MPH)
FL/FR: Higher than 16 KPH (12.4 MPH), fault detection time is 10s
- When spin occurs on front wheel, fault detection time is maximum 80s
|
| Case2 |
- When ABS control operates continuously for more than 60s on one wheel or more
|
| Warning Lamp |
Case1 |
|
| Case2 |
|
| Disable Condition |
- When all wheel speed is normal after driving more than 12 kph (7.45 mph) after the ignition switch turns off and then on
|