LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Motor Driven Power Steering System Diagnosis) >> DTC C1261-54: Steering Angle Sensor Is Not Calibrated >> DTC Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS/GDS to "Data Link Connector (DLC)".
  2. Perform "Steering Angle Sensor (SAS) Calibration" in "Vehicle S/W management" with KDS/GDS.
Fig.1 to 6
G13494584Courtesy of KIA MOTORS AMERICA, INC.
G13494585Courtesy of KIA MOTORS AMERICA, INC.
G13494586Courtesy of KIA MOTORS AMERICA, INC.
G13494587Courtesy of KIA MOTORS AMERICA, INC.
G13494588Courtesy of KIA MOTORS AMERICA, INC.
G13494589Courtesy of KIA MOTORS AMERICA, INC.

Good 

No Good