Circuit Inspection
WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
FPCM connector | 10 (B+) | Chassis ground | - | Approx. 11.2V |
|
FPCM connector | 6 (fuel sender +) |
CLU connector | 14 (fuel sender +) | Approx. below 1Ω |
| FPCM connector | 1 (fuel sender -) | Chassis ground | 16 (fuel sender -) | Approx. below 1Ω | |
| FPCM connector | 6 (fuel sender +) |
ECM connector | 76 (fuel sender +) | Approx. below 1Ω | |
| FPCM connector | 6 (fuel sender +) |
Chassis ground | - | ∞ (infinity)Ω | |
Good
- Go to "COMPONENT INSPECTION " procedure.
No Good
- Repair or replace as necessary and then, go to "VERIFICATION OF REPAIR " procedure.