Inspection Procedure
WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
- Visually and/or physically inspect following conditions;
- Proper installation of O2 sensors.
- Check for corrosion on terminals.
- Check for damaged wiring.
- Fuel, engine coolant or oil contamination.
- Check for good ground for O2 sensor.
- Has any problems been found?
Good
- Go to "FUEL SYSTEM INSPECTION " procedure.
No Good
- Repair as necessary and go to "VERIFICATION OF REPAIR " procedure.