LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Front Door Assembly) >> Front Door Black Molding Tape >> Repair Procedures >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Put on gloves to protect your hands.

Information 

  1. Remove the front door window glass run.

    (Refer to Front Door - "FRONT DOOR WINDOW GLASS RUN ")

  2. Remove the front door black molding tape (A).
    G13481932Courtesy of KIA MOTORS AMERICA, INC.
  3. To install, reinstall in reverse order of removal procedure.