Repair Procedures: Replacement
CAUTION:
- Put on gloves to prevent hand injuries.
NOTE:
- When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
- Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
- Take care not to bend or scratch the trim and panels.
- Remove the front bumper cover.
(Refer to Front Bumper - "FRONT BUMPER COVER ")
- Remove the front bumper energy absorber (A).
- After loosening the mounting screws, remove the front bumper upper cover (A).
- After loosening the mounting screws, remove the radiator grill (A).
- To install, reverse removal procedure.
Information
- Replace any damaged clips (or pin-type retainers).