LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Blind Spot Collision Warning Diagnosis >> DTC C1743-05: Software Mis-Match >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

Trouble shooting Condition Possible Cause
Main action
  • Monitor the CAN signal
  1. Poor contact of connector
  2. Open/short in CAN communication circuit
  3. BCM
Prerequisite condition
  • Battery voltage is normal
  • 1.5 sec. after turning the ignition switch on
  • Engine is running
  • Turn on the BSD or RCTA switch
  • CAN Bus-off DTC (C161688) is not detected
Threshold Value
  • A Gateway CAN message was not received over 2 times
Diagnosis time
  • after 1 sec.
scientia non olet · About LEMON Manuals