LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Blind Spot Collision Warning Diagnosis >> DTC C170D-04: ECU Hardware Error (REAR LEFT) >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

Trouble shooting Condition Possible Cause
Main action
  • Monitor the TCU CAN signal
  1. Poor contact of ignition wire harness connector
  2. Open/short in wire harness
  3. BSD ECU (RH)
Prerequisite condition
  • Battery voltage is normal
  • 1.5 sec. after turning the ignition switch on
Threshold Value
  • An error in the righthand ECU H/W
Diagnosis time
  • Between 0-60 sec. (depending on the cause of the trouble)
scientia non olet · About LEMON Manuals