LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Veloster Base, Automatic DCT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators And Gauges >> Instrument Cluster >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the upper shroud (A) with moving down the steering wheel.
    Fig 1: Locating Upper Shroud
    G12126381Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the cluster fascia upper panel (A).
    Fig 2: Removing Cluster Fascia Upper Panel
    G12126382Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the cluster (A) after loosening 4 screws and disconnecting a connector (B).
    Fig 3: Removing Cluster Screws
    G12126383Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals