Repair Procedures: Inspection: Tachometer
- Connect the GDS to the diagnostic link connector or install a tachometer.
- With the engine started, compare the readings of the tester with that of the tachometer. Replace the tachometer if the tolerance is exceeded.
CAUTION:
- Reversing the connections of the tachometer will damage the transistor and diodes inside.
- When removing or installing the tachometer, be careful not to drop it or subject it to severe shock.
TACHOMETER REVOLUTION TOLERANCE SPECIFICATIONS
| Revolution (rpm) | Tolerance (rpm) Max 8000rpm |
|---|---|
| Gasoline | |
| 1, 000 | ±100 |
| 2, 000 | ±100 |
| 3, 000 | ±100 |
| 4, 000 | ±100 |
| 5, 000 | ±100 |
| 6, 000 | ±100 |
| 7, 000 | ±100 |
| 8, 000 | ±100 |