LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Veloster Base, Automatic DCT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators And Gauges >> Instrument Cluster >> Repair Procedures >> Inspection >> Seat Belt Switch

Seat Belt Switch

  1. Remove the connector from the switch.
  2. Check for continuity between terminals.
Seat belt condition Continuity
Fastened Non-conductive (∞Ω)
Not fastened Conductive (Ω)
Fig 1: Seat Belt Switch
G12126380Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals