LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> AHB (Active Hydraulic Boost) System (PHEV) >> Repair Procedures >> AHB Brake System Bleeding Procedure >> Air Bleeding Tool Removal Procedure

Air Bleeding Tool Removal Procedure

  1. To remove the SST (09580-3D100) from the vehicle, close the air shut-off valve (A) first.
    Fig 1: Closing Air Shut-Off Valve
    G11668926Courtesy of HYUNDAI MOTOR AMERICA
  2. After disconnecting the air hose (B), bleed air in the reservoir tank by opening the air shut-off valve (A) slowly.
    Fig 2: Opening Air Shut-Off Valve
    G11668927Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION: To prevent back flow of brake fluid, be sure to open the air shut-off valve slowly then bleed air in the reservoir tank.
  3. Remove SST (09580-3D100) and the cap of SST (0k585-E8100) on the reservoir tank.
    Fig 3: Removing SST (09580-3D100) And Cap Of SST (0K585-E8100) On Reservoir Tank
    G11668928Courtesy of HYUNDAI MOTOR AMERICA
  4. Install the brake reservoir tank cap.
scientia non olet · About LEMON Manuals