LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> AHB (Active Hydraulic Boost) System (PHEV) >> Brake Actuation Unit >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Installation is the reverse of removal.
  2. Check the brake pedal operation.
  3. After filling the brake fluid in the reservoir, perform the air bleed. (Refer to the AHB Brake System Bleeding Procedure  )
  4. Conduct Brake Pedal Travel sensor (PTS) calibration. (Refer to the Brake System - "Brake Pedal ")
  5. Conduct Longitudinal G Sensor Calibration.
  6. Conduct Pressure sensor Calibration.
scientia non olet · About LEMON Manuals