Repair Procedures: Removal

CAUTION:

Put on gloves to protect your hands.
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

Disconnect the negative (-) battery terminal.
Remove the cluster fascia panel.
(Refer to Center Fascia Upper Panel )
Separate the instrument cluster (A) after loosening the mounting screws.

Fig 1: Separating Instrument Cluster Mounting Screws
Courtesy of HYUNDAI MOTOR AMERICA
Remover the instrument cluster (A) after disconnect the cluster connector (B).

Fig 2: Locating Instrument Cluster Connector
Courtesy of HYUNDAI MOTOR AMERICA