LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Crash Pad (PHEV) >> Steering Column Shroud Panel >> Repair Procedures >> Replacement >> Steering Column Shroud Upper Panel

Steering Column Shroud Upper Panel

CAUTION:
  • Put on gloves to prevent hand injuries.
NOTE:
  • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
  • When removing the interior trim pieces, use a plastic panel removal tool not to damage the surface.
  • Take care not to bend or scratch the trim and panels.
  1. Lower the steering wheel.
  2. Using a screwdriver or remover, remove the steering column shroud upper panel (A).
    Fig 1: Locating Steering Column Shroud Upper Panel
    G11678092Courtesy of HYUNDAI MOTOR AMERICA
  3. Install in the reverse order of removal.

    Information 

    • Replace any damage clips.