LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Plug-In Hybrid >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Crash Pad (PHEV) >> Steering Column Shroud Panel >> Repair Procedures >> Replacement >> Steering Column Shroud Lower Panel

Steering Column Shroud Lower Panel

CAUTION:
  • Put on gloves to prevent hand injuries.
NOTE:
  • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
  • When removing the interior trim pieces, use a plastic panel removal tool not to damage the surface.
  • Take care not to bend or scratch the trim and panels.
  1. Remove the crash pad lower panel. (Refer to Crash Pad - "Crash Pad Lower Panel ")
  2. Loosen the mounting screws by turning the steering wheel to the left and right, and remove the steering column shroud lower panel (A).
    Fig 1: Loosening Mounting Screws By Turning Steering Wheel
    G11678093Courtesy of HYUNDAI MOTOR AMERICA
  3. Install in the reverse order of removal.

    Information 

    • Replace any damage clips.