Repair Procedures: Replacement

NOTE:

When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
When removing the interior trim pieces, use a plastic panel removal tool not to damage the surface.
Take care not to bend or scratch the trim and panels.

Using a screwdriver or remover, remove the crash pad side cover [RH] (A).

Fig 1: Removing Crash Pad Side Cover (RH)
Courtesy of HYUNDAI MOTOR AMERICA
After loosen the mounting screws, remove the crash pad passenger side garnish (A).

Fig 2: Removing Crash Pad Passenger Side Garnish
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting screw, remove the crash pad garnish assembly [RH] (A).

Fig 3: Removing Crash Pad Garnish Assembly (RH)
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.
Information
- Replace any damage clips.