LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Timing System - 2.0L (Except HEV)) >> Front Oil Seal >> Repair Procedures >> Removal and Installation

Removal and Installation

WARNING: This page is about a different variant/trim than selected.
  1. Remove the crankshaft damper pulley.

    (Refer to Timing System - "CRANKSHAFT DAMPER PULLEY ")

  2. Remove the front oil seal (A).
    Fig 1: Removing Front Oil Seal
    G11993843Courtesy of HYUNDAI MOTOR AMERICA
  3. Install the crankshaft front oil seal (A) using SST (09214-3K000, 09231-H1100) (B).
    Fig 2: Installing Crankshaft Front Oil Seal
    G11993844Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals