LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Timing System - 2.0L (Except HEV)) >> Drive Belt >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the water pump belt.
    1. Insert the SST (09252-03100) between the water pump pulley and the water pump belt.
    2. Remove the water pump belt (A) by turning the damper pulley clockwise.
    Fig 1: Identifying Water Pump Belt
    G11993831Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION: Install the water pump belt while being careful not to damage the water pump belt caused by water pump pulley mounting bolt (B).
  2. For release the tension, turn the drive belt tensioner counterclockwise then install the drive belt (A).
    Fig 2: Engine Drive Belt Routing Diagram
    G11993832Courtesy of HYUNDAI MOTOR AMERICA
  3. Install the other parts in the reverse order of removal.
scientia non olet · About LEMON Manuals