Tightening Torques
WARNING: This page is about a different variant/trim than selected.
ENGINE MECHANICAL SYSTEM TIGHTENING TORQUE SPECIFICATIONS
| Item | N.m | kgf.m | lb-ft | |
|---|---|---|---|---|
| Engine mounting | ||||
| Engine mounting bracket to body fixing bolt | 68.6 ~ 88.3 | 7.0 ~ 9.0 | 50.6 ~ 65.1 | |
| Engine mounting insulator to engine mounting support bracket fixing nut | 88.3 ~ 107.9 | 9.0 ~ 11.0 | 65.1 ~ 79.6 | |
| Engine mounting support bracket to engine support bracket fixing bolt | 88.3 ~ 107.9 | 9.0 ~ 11.0 | 65.1 ~ 79.6 | |
| Engine mounting support bracket to engine support bracket fixing nut | 88.3 ~ 107.9 | 9.0 ~ 11.0 | 65.1 ~ 79.6 | |
| Transaxle mounting bracket to body fixing bolt | 68.6 ~ 88.3 | 7.0 ~ 9.0 | 50.6 ~ 65.1 | |
| Transaxle mounting bracket to body fixing nut | 68.6 ~ 88.3 | 7.0 ~ 9.0 | 50.6 ~ 65.1 | |
| Transaxle mounting support bracket fixing bolt | 58.8 ~ 78.5 | 6.0 ~ 8.0 | 43.4 ~ 57.9 | |
| Transaxle mounting bracket to transaxle mounting support bracket fixing bolt | 107.8 ~ 127.4 | 11.0 ~ 13.0 | 79.5 ~ 94.0 | |
| Roll rod bracket to sub frame fixing bolt | 49.0 ~ 63.7 | 5.0 ~ 6.5 | 36.2 ~ 47.0 | |
| Roll rod bracket to roll rod support bracket fixing bolt & nut | 107.8 ~ 127.4 | 11.0 ~ 13.0 | 79.5 ~ 94.0 | |
| Timing system | ||||
| Drive belt tensioner pulley bolt | 53.9 ~ 63.7 | 5.5 ~ 6.5 | 39.7 ~ 47.0 | |
| Drive belt tensioner bolt | 53.9 ~ 63.7 | 5.5 ~ 6.5 | 39.7 ~ 47.0 | |
| Crankshaft pulley bolt | [46.1 ~ 51.9] + [78° ~ 82°] | [4.7 ~ 5.3] + [78° ~ 82°] | [33.9 ~ 38.3] + [78° ~ 82°] | |
| Timing chain cover service hole bolt | 11.8 ~ 14.7 | 1.2 ~ 1.5 | 8.7 ~ 10.8 | |
| Timing chain cover bolt (M6 x 25) | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 | |
| Timing chain cover bolt (M8 x 28) | 18.6 ~ 22.5 | 1.9 ~ 2.3 | 13.7 ~ 16.6 | |
| Engine support bracket bolt (M8 x 30) | 19.6 ~ 24.5 | 2.0 ~ 2.5 | 14.5 ~ 18.1 | |
| Engine support bracket bolt (M10 x 40) | 39.2 ~ 44.1 | 4.0 ~ 4.5 | 28.9 ~ 32.5 | |
| Engine support bracket bolt (M10 x 45) | 39.2 ~ 44.1 | 4.0 ~ 4.5 | 28.9 ~ 32.5 | |
| Timing chain tensioner bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 | |
| Timing chain tensioner arm bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 | |
| Timing chain guide bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 | |
| Timing chain oil jet bolt | 7.8 ~ 9.8 | 0.8 ~ 1.0 | 5.8 ~ 7.2 | |
| Cylinder head | ||||
| Cylinder head cover bolt | [3.9~5.9] + [7.8~9.8] | [0.4~0.6] + [0.8~1.0] | [2.9~4.3] + [5.8~7.2] | |
| High pressure fuel pump bolt | 12.7 ~ 14.7 | 1.3 ~ 1.5 | 9.4 ~ 10.8 | |
| High pressure fuel pump bracket bolt | 18.6 ~ 23.5 | 1.9 ~ 2.4 | 13.7 ~ 17.4 | |
| Injector & rail assembly bolt | 18.6 ~ 23.5 | 1.9 ~ 2.4 | 13.7 ~ 17.4 | |
| CVVT bolt (LH/RH) | Exhaust CVVT bolt | 53.9 ~ 63.7 | 5.5 ~ 6.5 | 39.7 ~ 47.0 |
| Intake E-CVVT bolt | 58.8 ~ 68.6 | 6.0 ~ 7.0 | 43.3 ~ 50.6 | |
| Camshaft bearing cap bolt (M6) (LH/RH) | [5.9] + [10.8~12.7] | [0.6] + [1.1 ~1.3] | [4.3] + [8.0~9.4] | |
| Camshaft bearing cap bolt (M8) | [14.7] + [31.8~35.3] | [1.5] + [3.2~3.6] | [10.8] + [23.1~26.0] | |
| Cylinder head bolt | [32.4~36.3] + [90~95°] + [90~95°] | [3.3~3.7] + [90~95°] + [90~95°] | [23.9~26.8] + [90~95°] + [90~95°] | |
| Engine hanger bolt (Front/Rear) | 27.5 ~ 31.4 | 2.8 ~ 3.2 | 20.3 ~ 23.1 | |
| Camshaft position sensor (LH/RH) | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 | |
| Oil control valve (OCV) bolt (LH/RH) | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 | |
| Cylinder block | ||||
| Tensioner assembly intergrated bracket bolt | 39.2 ~ 44.1 | 4.0 ~ 4.5 | 28.9 ~ 32.5 | |
| Drive plate bolt | 117.7 ~ 127.5 | 12.0 ~ 13.0 | 86.8 ~ 93.9 | |
| Oil filter bracket bolt | 21.6 ~ 26.5 | 2.2 ~ 2.7 | 15.9 ~ 19.5 | |
| Ladder frame bolt | [8.8~9.8] + [17.7~20.6] + [27.5~31.4] | [0.9~0.1] + [1.8~2.1] + [2.8~3.2] | [6.5~7.2] + [13.0~15.2] + [20.3~23.1] | |
| Connecting rod bearing cap bolt | [17.7~21.6] + [88~92°] | [1.8~2.2] + [88~92°] | [13.0~15.9] + [88~92°] | |
| Main bearing cap bolt | [14.7] + [27.5~31.4] + [120~125°] | [1.5] + [2.8~3.2] + [120~125°] | [10.8] + [20.3~23.1] + [120~125°] | |
| Piston cooling oil jet bolt | 24.5 ~ 29.4 | 2.5 ~ 3.0 | 18.1 ~ 21.7 | |
| Crankshaft position sensor bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 | |
| Crankshaft position sensor cover bolt (M6) | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 | |
| Crankshaft position sensor cover bolt (M8) | 18.6 ~ 23.5 | 1.9 ~ 2.4 | 13.7 ~ 17.4 | |
| Knock sensor | 18.6 ~ 23.5 | 1.9 ~ 2.4 | 13.7 ~ 17.4 | |
| Lubrication system | ||||
| Oil drain plug | 34.3 ~ 44.1 | 3.5 ~ 4.5 | 25.3 ~ 32.5 | |
| Oil filter | 11.8 ~ 15.7 | 1.2 ~ 1.6 | 8.7 ~ 11.6 | |
| Oil level gauge assembly bolt | 7.8 ~ 11.8 | 0.8 ~ 1.2 | 5.8 ~ 8.7 | |
| A/C compressor bracket bolt | 19.6 ~ 23.5 | 2.0 ~ 2.4 | 14.5 ~ 17.4 | |
| Oil pan bolt (M6) | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 | |
| Oil pan bolt (M9) | 26.5 ~ 30.4 | 2.7 ~ 3.1 | 19.5 ~ 22.4 | |
| BSM chain tensioner arm bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 | |
| BSM chain guide bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 | |
| BSM chain tensioner bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 | |
| Balance shaft module (BSM) bolt (M9X181.5) | [22.6~26.5] + [88~92°] | [2.3~2.7] + [88~92°] | [16.6~19.5] + [88~92°] | |
| Balance shaft module (BSM) bolt (M9X100) | [22.6~26.5] + [43~47°] | [2.3~2.7] + [43~47°] | [16.6~19.5] + [43~47°] | |
| Oil pressure switch | 7.8 ~ 11.8 | 0.8 ~ 1.2 | 5.8 ~ 8.7 | |
| Cooling system | ||||
| Water pump pulley bolt | 7.8 ~ 9.8 | 0.8 ~ 1.0 | 5.8 ~ 7.2 | |
| Water pump bolt | 18.6 ~ 23.5 | 1.9 ~ 2.4 | 13.7 ~ 17.4 | |
| Water pump housing bolt | 18.6 ~ 23.5 | 1.9 ~ 2.4 | 13.7 ~ 17.4 | |
| Water inlet fitting bolt | 7.8 ~ 11.8 | 0.8 ~ 1.2 | 5.8 ~ 8.7 | |
| Water temperature control assembly nut | 18.6 ~ 23.5 | 1.9 ~ 2.4 | 13.7 ~ 17.4 | |
| Water temperature control assembly bolt | 14.7 ~ 19.6 | 1.5 ~ 2.0 | 10.8 ~ 14.5 | |
| Water inlet pipe bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 | |
| Intake and exhaust system | ||||
| Air intake hose clamp bolt | 2.9 ~ 4.9 | 0.3 ~ 0.5 | 2.2 ~ 3.6 | |
| Air cleaner assembly bolt | 7.8 ~ 9.8 | 0.8 ~ 1.0 | 5.8 ~ 7.2 | |
| Electronic throttle control (ETC) module bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 | |
| Intake manifold stay bolt | 18.6 ~ 23.5 | 1.9 ~ 2.4 | 13.7 ~ 17.4 | |
| Intake manifold bolt | 18.6 ~ 23.5 | 1.9 ~ 2.4 | 13.7 ~ 17.4 | |
| Intake manifold nut | 18.6 ~ 23.5 | 1.9 ~ 2.4 | 13.7 ~ 17.4 | |
| Oxygen sensor (Front/Rear) | 39.2 ~49.0 | 4.0 ~ 5.0 | 28.9 ~ 36.2 | |
| Turbocharger oil drain pipe assembly bolt | 7.8 ~ 11.8 | 0.8 ~ 1.2 | 5.8 ~ 7.2 | |
| Turbocharger oil drain pipe assembly nut | 7.8 ~ 11.8 | 0.8 ~ 1.2 | 5.8 ~ 7.2 | |
| Turbocharger water hose bolt | 26.5 ~ 32.4 | 2.7 ~ 3.3 | 19.5 ~ 23.9 | |
| Turbocharger oil feed pipe & hose bolt | 7.8 ~ 11.8 | 0.8 ~ 1.2 | 5.8 ~ 8.7 | |
| Turbocharger oil feed pipe & hose eye bolt | 11.8 ~ 17.7 | 1.2 ~ 1.8 | 8.7 ~ 13.0 | |
| Turbo manifold module heat protector bolt | 7.8 ~ 11.8 | 0.8 ~ 1.2 | 5.8 ~ 8.7 | |
| Turbo manifold module stay bolt (M8) | 18.6 ~ 27.5 | 1.9 ~ 2.8 | 13.7 ~ 20.3 | |
| Turbo manifold module stay bolt (M10) | 49.0 ~ 53.9 | 5.0 ~ 5.5 | 36.2 ~ 39.7 | |
| Turbo manifold module nut | 49.0 ~ 53.9 | 5.0 ~ 5.5 | 36.2 ~ 39.7 | |
| Turbo adapter nut | 49.0 ~ 53.9 | 5.0 ~ 5.5 | 36.2 ~ 39.7 | |
| Catalytic converter/muffler nut | 39.2 ~ 58.8 | 4.0 ~ 6.0 | 28.9 ~ 43.4 | |
| Intercooler inlet pipe mounting bolt | 14.7 ~ 19.6 | 1.5 ~ 2.0 | 10.8 ~ 14.5 | |
| Intercooler hose clamp bolt | 4.9 ~ 6.9 | 0.5 ~ 0.7 | 3.6 ~ 5.1 | |
| Intercooler mounting bracket bolt | 3.9 ~ 5.9 | 0.4 ~ 0.6 | 2.9 ~ 4.3 | |