LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 42 (Engine Control System Diagnosis - 2.0L (2 Of 3) (Except HEV)) >> DTC P0444: Evaporative Emission System-Purge Control Valve Circuit Open >> Wiring Inspection >> Terminal and Connector Inspection

Terminal and Connector Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the PCSV and PCM connectors and inspect for looseness, poor connection, bending, corrosion, contamination, deterioration or damage. Reconnect the connectors.
  2. Connect the GDS and go to "Current Data".
  3. Monitor PCSV values in Current Data, check and wiggle the harness(es), connector(s), and terminal(s).
  4. Any change in the values indicates a poor connection. Was a connector problem found?

    YES 

    NO 

scientia non olet · About LEMON Manuals