DTC Information: DTC Detecting Condition
WARNING: This page is about a different variant/trim than selected.
| Item |
Detecting Condition |
Possible cause |
| DTC Strategy |
- Erratic Air/Fuel correction value
|
- Fuel leakage or stuck in injector
- Air leakage in cylinder
- Ignition system error in cylinder
- Abnormal compression pressure in cylinder
|
| Enable Conditions |
- Engine coolant temperature is higher than 70°C (158°F)
- Catalyst temperature is lower than 900°C (1652°F)
- Engine speed is between 1088 RPM and 3000 RPM
- Fuel mass set point is between 0.025 g/rev and 0.061 g/rev
- Canister load is lower than 0.3
- Lambda control active and Lambda set-point = 1
|
| Threshold value |
- Individual Cylinder Fuel Control multiplier is lower than -15 or higher than 15
|
| Diagnosis Time |
|
| MIL On Condition |
|