LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Timing System - 1.6L (Except HEV)) >> Front Oil Seal >> Repair Procedures >> Removal and Installation

Removal and Installation

WARNING: This page is about a different variant/trim than selected.
  1. Crankshaft damper pulley.

    (Refer to Timing System - "Crankshaft Damper Pulley ")

  2. Remove the front oil seal.
    NOTE: Using the SST (09455-21200), reassemble the timing chain cover oil seal.
    Fig 1: Removing Front Oil Seal
    G11986797Courtesy of HYUNDAI MOTOR AMERICA
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals