LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Timing System - 1.6L (Except HEV)) >> Drive Belt >> Repair Procedures >> Inspection >> Drive Belt Inspection

Drive Belt Inspection

WARNING: This page is about a different variant/trim than selected.

Visually check the belt for excessive wear, frayed cords etc.

If any defect has been found, replace the drive belt.

NOTE: Cracks on the rib side of a belt are considered acceptable. If the belt has chunks missing from the ribs, it should be replaced.
Fig 1: Checking Belt For Excessive Wear And Frayed Cords
G11986775Courtesy of HYUNDAI MOTOR AMERICA