LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Timing System - 1.6L (Except HEV)) >> Drive Belt >> Repair Procedures >> Adjustment >> Drive belt tension measurement and adjustment >> Belt tension measurement

Belt tension measurement

WARNING: This page is about a different variant/trim than selected.

Measure the belt tension using a mechanical tension gauge or a sonic tension meter.

Tension 

New Belt:

961.0 ~ 980.7 N (98.0 ~ 100.0 kgf, 216.1 ~ 220.5 lbf)

Used Belt:

637.4 ~ 735.5 N (65.0 ~ 75.0 kgf, 143.3 ~ 165.3 lbf)

CAUTION:
  • If the engine has run for 5 minutes or more, the belt tension must be adjusted as a used belt.
  • When installing the V-ribbed belt, all grooves on the pulley should be covered with belt ribs.
  • A loose belt causes slip noise.
  • Too tight belt cause bearing of alternator and water pump to damage.
scientia non olet · About LEMON Manuals