DTC Information: DTC Detecting Condition
WARNING: This page is about a different variant/trim than selected.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
- Monitor the vacuum decay slope
|
- Leakage in each hose/fuel filler pipe
- Leakage in CCV/Canister/Fuel tank/Fuel Filler Cap
|
| Enable Conditions |
- Canister Close Valve close
- Canister Purge Valve close
- Time after engine starts has passed 130 second.
- ECT at start is between 0°C (32°F) and 35°C (95°F).
- The difference between ECT at start and IAT is less than 9.8°C (49.6°F).
- IAT temp is between 0°C (32°F) and 40°C (104°F).
- BARO is higher than 74.5 kPa
- Fuel level is between 15% and 85%
- Duration of tank ventilation is higher than 10 sec
- Fuel System Status Closed loop
- Accel. Pedal = 0%
- Vehicle speed = 0mph
- Disable conditions: P0300 ~ P0304
|
| Threshold Value |
- FTP gradient is higher than 20~25 Pa/sec
|
| Diagnostic Time |
|
| MIL ON Condition |
|