LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 37 (Dual Clutch Transmission Control System - 1.6L (Except HEV)) >> Input Shaft Speed Sensor 2 >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install in the reverse order of removal.
NOTE:
  • Before installing the input speed sensor, check the assembled state of the O-rings (A) and should apply gear oil to the surface of O-rings.
    Fig 1: Locating O-Rings
    G11987522Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals