DTC Information: DTC Detecting Condition
WARNING: This page is about a different variant/trim than selected.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
|
1. Faulty AAT |
| Enable Conditions |
Hot |
- Coolant temperature is higher than 165°F.
- Engine RPM is higher than 1500 RPM and lower than 4000 RPM.
- Intake temp. change during 12 sec is lower than 34.7°F.
- Ambient air temp. change during 12 sec is lower than 34.7° F.
- Vehicle speed is higher than 43.5 mph and lower than 81mph.
|
| Cold |
- Operating time after engine start is longer than 60 sec.
- Coolant temperature is lower than 93.2°F.
- Engine stop time is longer than 450 min.
- Intake temp. change during 12 sec is lower than 34.7°F.
- Ambient air temp. change during 12 sec is lower than 34.7° F.
|
| Threshold Value |
- Diagnosis when the ambient air temp. value is higher or lower than model temperature
- Hot condition: Difference between ambient air temp. sensor and model value is larger than 68°F.
- Cold condition: Difference between ambient air temp. sensor and intake temp. model value is larger than 59°F.
|
| Diagnosis Time |
|
| MIL On Condition |
|