DTC Information: DTC Detecting Condition
WARNING: This page is about a different variant/trim than selected.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
- Evaluate O2 sensor Element Temperature via measuring Element Resistance
|
- Heater control circuit open or short
- Power supply circuit open or short
- Poor connection or damaged harness
- Faulty HO2S
|
| Enable Conditions |
- Battery voltage is between 11 V and 16 V
- Downstream O2 sensor operative readiness detected (sensor element resistance is lower than 1 kQ or heater max heating or normal heating for more than 75 sec)
|
| Threshold Value |
- Downstream O2 sensor internal resistance is greater than 1000C
|
| Diagnostic Time |
|
| Mil On Condition |
|