System Inspection
WARNING: This page is about a different variant/trim than selected.
■ Visual Inspection
- Check oil level is O.K.
- Is oil contaminated?
- Check for loose CKPS.
- Has a problem been found?
YES
- Repair or replace as necessary. Go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Go to "Visually check CKPS and target wheel" as follow.
■ Visually check CKPS and target wheel
- IG "OFF".
- Visually check CKPS is loosened or target wheel is deformed or damaged.
- Is the above components normal?
YES
- Go to next step.
NO
- Repair or replace as necessary. Go to "VERIFICATION OF VEHICLE REPAIR " procedure.