Removal and Installation

WARNING: This page is about a different variant/trim than selected.

Loosen the mounting clip and bolt and then remove the under cover (A).
Tightening torque :

7.8 ~ 11.7 N.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.6 lb-ft)

Fig 1: Locating Under Cover With Mounting Clip And Bolt
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Locating Under Cover
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.