Rollroad Mounting

WARNING: This page is about a different variant/trim than selected.

Rollroad bracket mounting bolts and rollroad bracket (A).
Tightening torque

Bolt (B):

107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m, 79.6 ~ 94.0 lb-ft)

Bolt (C):

49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)

Fig 1: Locating Rollroad Bracket With Mounting Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Remove the rollroad support bracket (A).
Tightening torque :

49.0 ~ 68.6 N.m (5.0 ~ 7.0 kgf.m, 36.2 ~ 50.6 lb-ft)

Fig 2: Locating Rollroad Support Bracket With Mounting Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.