LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (Intake & Exhaust System - 2.0L (Except HEV)) >> Air Cleaner >> Repair Procedures >> Removal and Installation

Removal and Installation

WARNING: This page is about a different variant/trim than selected.
  1. Remove the engine cover.

    (Refer to Engine Mechanical System - "ENGINE COVER ")

  2. Remove the air duct (A).
    Fig 1: Locating Air Duct
    G11994081Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the battery.

    (Refer to Engine Electrical System - "BATTERY ")

  4. Remove the air cleaner assembly.
    1. Disconnect the breather hose (A), the recirculation hose (B), the vacuum hose (C).
    2. Disconnect the air intake hose (D) and then remove the air cleaner assembly (E).
      Fig 2: Locating Breather Hose, Recirculation Hose And Vacuum Hose
      G11994082Courtesy of HYUNDAI MOTOR AMERICA
      Fig 3: Locating Air Intake Hose And Air Cleaner Assembly
      G11994083Courtesy of HYUNDAI MOTOR AMERICA
  5. Install in the reverse order of removal.