LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Charging System - 1.6L (Except HEV)) >> Alternator >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the battery negative terminal.
  2. Loosen the mounting bolts (A) and then, turn the adjusting bolt (B) clockwise to loosen tension.
    Fig 1: Locating Adjusting Bolt And Mounting Bolts
    G11987074Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the drive belt (A).
    Fig 2: Locating Drive Belt
    G11987075Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the air compressor connector (A) and the alternator connector (B), and remove the cable from alternator "B" terminal (C).
    Fig 3: Locating Air Compressor Connector, Alternator Connector And Alternator B Terminal
    G11987076Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the alternator (A).
    Fig 4: Locating Alternator With Mounting Bolts
    G11987077Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals