Tightening Torques
WARNING: This page is about a different variant/trim than selected.
AUTOMATIC TRANSAXLE SYSTEM TIGHTENING TORQUE SPECIFICATIONS
| Item | N.m | Kgf.m | lb-ft |
|---|---|---|---|
| Shift cable bracket mounting bolts | 14.7 ~ 21.6 | 1.5 ~ 2.2 | 10.9 ~ 15.9 |
| Shift cable mounting nut in the manual lever | 9.8 ~ 13.7 | 1.0 ~ 1.4 | 7.2 ~ 10.1 |
| Automatic transaxle upper mounting bolts (TM.→Eng.) | 42.2 ~ 53.9 | 4.3 ~ 5.5 | 31.1 ~ 39.8 |
| Automatic transaxle mounting bracket bolts | 88.3 ~ 107.9 | 9.0 ~ 11.0 | 65.1 ~ 79.6 |
| Automatic transaxle mounting support bracket bolts | 58.8 ~ 78.5 | 6.0 ~ 8.0 | 43.4 ~ 57.9 |
| Torque converter mounting bolts | 45.1 ~ 52.0 | 4.6 ~ 5.3 | 33.3 ~ 38.3 |
| Automatic transaxle lower mounting bolts (Eng.→TM.) | 42.2 ~ 48.1 | 4.3 ~ 4.9 | 31.1 ~ 35.4 |
| 42.2 ~ 53.9 | 4.3 ~ 5.5 | 31.1 ~ 39.8 | |
| TCM installation mounting bolt/nut | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 |
| Input shaft speed sensor mounting bolts | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 |
| Output shaft speed sensor mounting bolts | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 |
| Shift lever assembly bolts | 8.8 ~ 13.7 | 0.9 ~ 1.4 | 9.4 ~ 10.8 |
| Inhibitor switch mounting bolts | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 |
| Valve body cover mounting bolts | 11.8 ~ 13.7 | 1.2 ~ 1.4 | 8.7 ~ 10.1 |
| Injection hole (eyebolt) | 4.9 ~ 5.9 | 0.5 ~ 0.6 | 3.6 ~ 4.3 |
| ATF drain plug | 33.3 ~ 43.1 | 3.4 ~ 4.4 | 24.6 ~ 31.8 |
| Starter mounting bolts | 42.2 ~ 53.9 | 4.3 ~ 5.5 | 31.1 ~ 39.8 |