LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Charging System - 2.0L (Except HEV)) >> Alternator >> Repair Procedures >> Inspection >> Inspect Rotor

Inspect Rotor

WARNING: This page is about a different variant/trim than selected.
  1. Check that there is continuity between the slip rings (C).
    Fig 1: Checking Continuity Between Slip Rings
    G11994170Courtesy of HYUNDAI MOTOR AMERICA
  2. Check that there is no continuity between the slip rings and the rotor (B) or rotor shaft (A).
  3. If the rotor fails either continuity check, replace the alternator.
scientia non olet · About LEMON Manuals