Repair Procedures: Disassembly

WARNING: This page is about a different variant/trim than selected.

Remove the cooling fan (A) from the cooling fan assembly.
Tightening torque:

5.2 ~ 7.5 N.m (0.53 ~ 0.78 kgf.m, 3.83 ~ 5.53 lb-ft)
Remove the cooling fan motor cover (A).
Tightening torque:

2.1 ~ 3.6 N.m (0.2 ~ 0.36 kgf.m, 1.5 ~ 2.6 lb-ft)

Fig 1: Locating Cooling Fan Motor Cover With Screw
Courtesy of HYUNDAI MOTOR AMERICA
Remove the cooling fan motor (A).
Tightening torque:

3.7 ~ 4.0 N.m (0.37 ~ 0.4 kgf.m, 2.72 ~ 2.95 lb-ft

Fig 2: Locating Cooling Fan Motor With Screws
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.