Removal and Installation

WARNING: This page is about a different variant/trim than selected.

Remove the oil level gauge (A).

Fig 1: Removing Oil Level Gauge
Courtesy of HYUNDAI MOTOR AMERICA
Remove the intake manifold.
(Refer to Intake And Exhaust System - "INTAKE MANIFOLD ")
Remove the oil level pipe (A).
Tightening torque:

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf/m, 5.8 ~ 8.7 lb-ft)

Fig 2: Removing Oil Level Pipe
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.