LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Lubrication System - 2.0L (Except HEV)) >> Oil Cooler >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Loosen the drain plug, and drain the coolant. Remove the radiator cap to help drain the coolant faster. (Refer to Cooling System - "COOLANT ")
  2. Disconnect the oil cooler coolant hoses (A).
    Fig 1: Disconnecting Oil Cooler Coolant Hoses
    G11994043Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the oil filter (A).

    (Refer to Lubrication System - "ENGINE OIL ")

  4. Loosen the mounting bolt (A) and remove the oil cooler assembly (B).
    Fig 2: Removing Oil Cooler Assembly
    G11994044Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals