Selection Of Engine Oil

WARNING: This page is about a different variant/trim than selected.

Recommendation: 5W-30/ACEA A5

(If not available, refer to the recommended ACEA classification.)

Classification: ACEA A5 or above

(If not available, API SL, 1LSAC GF-3, ACEA A3 can be used.)

SAE viscosity grade: Refer to the recommended SAE viscosity number

Fig 1: SAE Viscosity Grade

Courtesy of HYUNDAI MOTOR AMERICA

NOTE: For best performance and maximum protection of all types of operation, select only those lubricants which:

Satisfy the requirement of the ACEA classification.
Have proper SAE grade number for expected ambient temperature range.
Lubricants that do not have both an SAE grade number and ACEA service classification on the container should not be used.