| DTC Strategy |
- Monitoring motor rotating time and activation current
|
- No disc or pad
- Open or short in rear left actuator circuit
- Faulty Brake caliper assembled condition
- Faulty rear left actuator
|
| Enable conditions |
- IG ON
- Battery voltage is between 9V ~ 16V
- EPB Apply or Release
|
| Threshold value |
- If actuator runs for long time
- If left motor current is much bigger than right motor current
- Motor current decrease rapidly or runs for long time
- Actuator runs for enough time but adequate clamping force was not achieved
|
| Fail-Safe |
- Automatic release function inhibited
|
| Lamp |
|