| DTC Strategy |
- Monitoring the Switch signal
|
- EPB switch CIRUCIT open/short circuit
- Faulty EPB switch
- Driver abnormal switch control (too much activation, pull or push for long time or slowly push/pull switch)
|
| Enable conditions |
- EPB Wake up, battery voltage is in normal range
|
| Threshold value |
- Switch signal is abnormal for more than 2seconds
- Switch is disconnected for more than 2seconds
- Switch signal is apply or relase for more than 90 seconds (For apply, vehicle has to be stationary)
|
| Fail Safe |
- EPB function using switch inhibited
|
| Lamp |
|