LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Fuel Filler Door - Inspection (Except HEV) >> Fuel Filler Door Release Actuator >> Repair Procedures

Repair Procedures

  1. Remove the left luggage side trim. (Refer to Body - TRUNK TRIM "Trunk Trim")
  2. Loosen the fuel filler actuator mounting bolts (2EA).
    Fig 1: Loosening Fuel Filler Actuator Mounting Bolts
    G11988728Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the fuel filler door release actuator (B) after disconnecting the fuel filler door release actuator connector (A).
    Fig 2: Removing Fuel Filler Door Release Actuator
    G11988729Courtesy of HYUNDAI MOTOR AMERICA
  4. Check for continuity between terminal No. 1 and No. 2. If there is no continuity, replace the fuel filler door release actuator (A).
    Fig 3: Locating Fuel Filler Door Release Actuator Connector Terminals
    G11988730Courtesy of HYUNDAI MOTOR AMERICA