Repair Procedures: Replacement
CAUTION:
- Put on gloves to protect your hands.
NOTE:
- When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
- Take care not to bend or scratch the trim and panels.
- Remove the front bumper cover.
(Refer to Front Bumper - "FRONT BUMPER COVER ")
- Remove the mounting clip (A) and then remove the front bumper energy absorber (B).
- Remove the pantoscopic camera.
(Refer to Body Electrical System - "Pantoscopic Camera")
- Loosen the radiator grill mounting screws.
- Unlock the lock pins by pushing it up with a screwdriver or remover and then remove the radiator grill (A).
- Install in the reverse order of removal.
Information
- Replace any damaged clips.