Repair Procedures: Replacement

CAUTION:

NOTE:

When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.

Remove the cap (A) and remove the nuts, then remove the wiper arm (B).
Tightening torque:

22.6 ~ 26.5 N.m (2.3 ~ 2.7 kgf.m, 16.6 ~ 19.5 lb-ft)

Fig 1: Locating Wiper Arm And Cap With Nut
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the nozzle hose (A).
Detach the clips, then remove the cowl top cover (B).

Fig 2: Locating Cowl Top Cover And Nozzle Hose With Clips
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.
Information
- Replace any damaged clips.