Repair Procedures: Removal

CAUTION:

Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

Disconnect the negative (-) battery terminal.
Remove the cluster fascia panel.
(Refer to Body - Cluster Fascia Panel - "Center Facia Upper Panel ")
Separate the instrument cluster (A) after loosening the mounting screws.

Fig 1: Separating Instrument Cluster Mounting Screws
Courtesy of HYUNDAI MOTOR AMERICA
Remover the instrument cluster (A) after disconnect the cluster connector (B).

Fig 2: Removing Instrument Cluster
Courtesy of HYUNDAI MOTOR AMERICA