LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Veloster Base, Automatic DCT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators & Gauges >> Instrument Cluster >> Repair Procedures >> Inspection >> Seat Belt Switch

Seat Belt Switch

  1. Remove the connector from the switch.
  2. Check for continuity between terminals.
    Seat Belt Condition Continuity
    Fastened Non-Conductive (∞Ω)
    Not Fastened Conductive (Ω)
    Fig 1: Seat Belt Switch Location
    G10605872Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals